Jump to content


Πρόγραμμα για check σε σκληρούς...


kkouinis

Recommended Posts

Έχω 2 maxtor 120 Gb σε SATA Raid-0 πάνω σε μια Abit NF7-S και νομίζω ότι μάλλον κάποιος από τους 2 δεν πάει καλά.

Δοκίμασα να κάνω τεστ με το Norton Disk Doctor και δεν με αφήνει γιατί κάποιο πρόγραμμα απασχολεί (λέει) τους δίσκους. Αυτό συμβαίνει και σε safe mode.

Υπάρχει κανένα πρόγραμμα που να κάνει την δουλειά που θέλω?

Σημείωση: Το πρόγραμμα που έχει η Maxtor γι' αυτήν την δουλειά δεν δουλεύει για σκληρούς που είναι συνδεδεμένοι σε N-Force κλπ.

Link to comment
Share on other sites

Ψαξε να βρεις το Easy Recovery Pro (στη θαλασσα καταλαβες τι εννοω).....

Εκτος του οτι σου επιτρεπει να ανακτησεις τα δεδομενα σου σε αρκετες περιπτωσεις κανει και τσεκαρισμα των σκληρων δισκων......

Επισης και το Partition Magic κανει τσεκαρισμα αν και δεν το εχω χρησιμοποιησει για το σκοπο αυτο παρα μονο για On the fly διαχωρισμο των δισκων.... :D

Link to comment
Share on other sites

Έχω 2 maxtor 120 Gb σε SATA Raid-0 πάνω σε μια Abit NF7-S και νομίζω ότι μάλλον κάποιος από τους 2 δεν πάει καλά.

Δοκίμασα να κάνω τεστ με το Norton Disk Doctor και δεν με αφήνει γιατί κάποιο πρόγραμμα απασχολεί (λέει) τους δίσκους. Αυτό συμβαίνει και σε safe mode.

Υπάρχει κανένα πρόγραμμα που να κάνει την δουλειά που θέλω?

Σημείωση: Το πρόγραμμα που έχει η Maxtor γι' αυτήν την δουλειά δεν δουλεύει για σκληρούς που είναι συνδεδεμένοι σε N-Force κλπ.

ποιό δίνει η maxtor για τους σκληρούς ?

Link to comment
Share on other sites

ποιό δίνει η maxtor για τους σκληρούς ?

Το PowerMax.

Από το site:

The PowerMax utility is designed to perform diagnostic read/write verifications on Maxtor and Quantum hard drives. These tests will determine hard drive integrity. The PowerMax utility is effective on all ATA (IDE) hard drives with a capacity greater than or equal to 500 MB. Maxtor recommends the use of this utility for troubleshooting potential hard drive problems. These problems include, but are not limited to the following:

Potential hard drive surface problems (e.g., bad clusters, bad sectors, partitioning/formatting problems, etc.).

Drive recognition problems (e.g. hard drive that is not recognized by the operating system).

Software removal.

Note: PowerMax v 4.09 will not detect ATA or SATA hard disks connected to embedded or add in RAID controllers, NVIDIA Force 3, Force 4, VIA KT 600 and KT800 chipsets. If the hard disk is connected to an unsupported controller, it will have to be moved to an alternate system, or controller for diagnosis. Please check the PowerMax download page periodically for updates. Beginning June 1st 2004 all versions of PowerMax prior to v4.09 will no longer be supported. Maxtor recommends that you update to version 4.09 before testing your hard disk.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.