Jump to content


Πώς να κάνετε τον kingston v series 40gb να υποστηρίζει trim


Eddie

Recommended Posts

Οπως ξέρετε ο kingston v series 40gb είναι ουσιαστικά ένας intel rebranded. Οταν τον πρωτοέβγαλε η kingston είχε υποσχεθεί trim support με firmware update. Ωστόσο η ιντελ δεν της το επέτρεψε καθώς ήθελε να το κρατήσει για τον δικό της v series 40gb, και έτσι η kingston αποφάσισε να σταματήσει να τον βγάζει και να τον αντικαταστήσει με τον 30gb που έχει toshiba controller, και όλοι εμείς που τον είχαμε αγοράσει περιμένοντας το trim, μείναμε ξεκρέμαστοι. Ωστόσο ο χρήστης telnet απο το overclock.net κατάφερε να εγκαταστήσει το firmware του ιντελ και να ενεργοποιήσει το trim στους kingston, και ο χρήστης enterprise έκανε έναν αναλυτικό οδηγό για το πώς γίνεται αυτό.

πηγή

Hello Members of Overclock.Net :)

As some of you will be aware the Kingston 40GB SSDNOW Drives do not support TRIM by default as Intel decided not to supply Kingston with a firmware for these drives to allow TRIM functionality and Kingston has cut off support of this drive as its reached End Of Life:(

Your probably asking why we are talking about Intel. Well in a nutshell. The Kingston 40GB SSDNOW drives feature Intel flash chips and an Intel memory controller. As such Only Intel firmwares will work with this drive. As Intel gave Kingston the shaft it is up to the consumers to mess around and mod the Intel firmware to support TRIM:mad: Thanks Intel...Thanks

However there is a FIX for all the disappointed Kingston owners. Thanks to User '' Telnet ''' on OCN and his in-depth research, he has discovered that we can indeed enable TRIM on the Kingston 40GB SSDNOW drives.

All credit goes to Telnet for his amazing findings, effort and providing us with this modified update utility. I am simply compiling a simple guide for the newbies out there to follow:) This guide was inspired from this thread : http://www.overclock.net/hard-drives-storage/642728-tried-update-kingston-40gb-ssds-fw.html

While this is a very simple procedure. Myself and Telnet will not take any responsibility for damage done to your drive by either negligence or failure to follow this guide properly. I would advise backing up your SSD drive before performing this procedure. While it should not effect the data, it is better to be safe than sorry. I did this on my SSD drive while my OS was installed and it had no ill effects. This guide is only for the Kingston SSDNow V Series SNV125-S2/40GB. Please do not attempt this guide on any other variant SSD

Here we go:

PART 1

Firstly you will need to Update the Firmware on your Kingston 40GB SSD to the latest Intel firmware. However you have to use a modded version of the Intel Updater as the stock Updating Utility will not recognise the Kingston drive as a compatible drive to flash ( As its not branded Intel ).

1ST Method

1. Download the Modified Intel Updater Utility attached to this thread below.

2. Create a standard bootable Flash drive or DVD/CD ROM.

3. Place the ''iSSDFUT.Exe'' on the bootable Flash drive Or DVD/CD ROM ( Before burning of course )

For help on creating a bootable USB flash drive please take a look Here : http://www.bootdisk.com/pendrive.htm

2ND Method

1. Download the Intel Updater ISO from here : http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18363

2. Use an ISO editor such as ''MAGIC ISO'' to edit the downloaded ISO.

3. When using the ISO Editor replace the ''iSSDFUT.Exe'' in the ISO with the ''iSSDFUT.Exe'' attached to this thread. Save the ISO and Burn it using your Burning software.

Once you have created your bootable medium with the updating utility. Restart your PC and amend your BIOS settings boot either from your USB or DVD/CDROM drive first.

Once your PC boots into DOS on your USB or DVD/CDROM you will need to enter the flash utility by typing ''iSSDFUT'' and hit ''ENTER''.

You will now have entered the Intel SSD flashing utility. Follow the onscreen instructions and accept all the various disclaimer agreements etc. Very simple and straight forward process. Once you have done this it will move onto the SSD detection phase. With Telnet's modified utility it will now successfully detect our Kingston drives as viable for flashing.

During this process it will update your stock Kingston firmware of 02HA to the newer Intel firmware of 02HD

This is what you should see during the flashing process:

dsc00143jo.jpg

Done. This is the flashing procedure complete. You have successfully completed the first part to this 3 Part process.

...................................................................................

PART 2

Now we have to restore the the newly flashed firmware to defaults which in turn activates the TRIM functionality on our Kingston drives. When the Intel Firmware is flashed onto the Kingston drive it keeps the drives current configuration data. This is no good as with this configuration data TRIM is disabled. We need to restore the firmware configuration to default to allow a new configuration to be put in place enabling TRIM.

To do this you will need a DOS utility called ''HDAT2''. You can download this Utility in an ISO format here : http://www.hdat2.com/ . Go to the Download section and download the ''CD BOOT ISO IMAGE''.

Once downloaded Burn the ISO using your favourite DVD/CD burning software. I use CDBURNERXP. The ISO is already set as bootable so there is nothing else you need to do but burn the ISO as it is !

Once again amend your BIOS if you need to, so your system boots from your DVD/CD ROM drive and boots into the HDAT2 utility. Once within the utility you will be prompted with a blue screen with 4 options. Select option 1 and hit ''ENTER''.

Your system will now load into the HDAT2 utility. Follow the simple on screen prompts. You may get error messages but do not be alarmed. This is just due to HDAT not finding some devices in your system it may be accustomed to. Just hit ENTER or ANYKEY when prompted to.

Once loaded into the Utility you will be at the Device list main menu screen for HDAT2. You should see the below :

picture01.jpg

Within the Device list main menu you should see your Kingston SSD listed in the device list.

Highlight your Kingston SSD drive and hit ''ENTER'' You will then see this screen below which is the ''Device main menu''

picture02.jpg

From here you will want to select and highlight the 6th option on the list. '' Device configuration overly (DCO) Menu '' Hit Enter

Once within the Device configuration menu you will see the below screen :

picture05.jpg

From here select and highlight ''Restore''and hit Enter. You will enter the restore utility and from here follow the on-screen instructions for restoring the configuration on your drive.

Once you have cleared the configuration from your drive. ( I did it twice just to be sure ). Hit ESC multiple times until you get back to the blank DOS screen and simply restart your machine and remove the USB flash drive or DVD/CDROM from your system as you now want to boot back into you OS.

You have now completed Part 2. All the technical stuff is now out of the way. Congrats :)

...................................................................

PART 3

Now that we have flashed and configured the drive we now want to make sure that TRIM is enabled and functioning.

You will need to do two things.

Firstly we will want to download and install ''CrystallDiskInfo'' which you can obtain from here : http://crystalmark.info/software/CrystalDiskInfo/index-e.html

Once installed run CrystalDiskInfo. You will see the below:

capturefw.png

You will notice that by ''Supported Features'' that the ''TRIM'' function is highlighted in black. This means it is enabled and functioning !

You can also tell if Windows 7 has correctly enabled TRIM.

Open up a Command Prompt window and type the following without quotation marks:

''fsutil behavior query disabledeletenotify''

If TRIM is enabled Command prompt will issue the following statement:

''DisableDeleteNotify = 0'' This means TRIM is Enabled.

Below is an example of what you would see :

capturekm.png

..............................................................................

Congratulations. Your Kingston SSDNOW 40GB SSD now has TRIM ! :gunner2:

Thanks again to Telnet's hard work in discovering this fix. Once again all Credit goes to him. I simply compiled this guide to make the process more understandable.:cheers:

HDAT2 Images obtained from http://www.hdat2.com/

This guide is ongoing and I will be touching it up so to speak. Stay tuned.

issdfut.zip

Προσωπικά το δοκίμασα και όλα πηγαν μια χαρά , χωρίς data loss ή αλλα προβλήματα. blackkingstonssdtrimena.th.jpg

Link to comment
Share on other sites

Πριν 12 ώρες το κατάφερε αυτό, αλλά δεν υπάρχουν προβλήματα και προσωπικά δεν νομίζω να υπάρξουν. Το κανονικό firmware της ιντελ πήρε και έβγαλε το περιορισμό που δεν επέτρεπε στο trim να ενεργοποιηθεί. Οι δύο δίσκοι έτσι και αλλιώς είναι ολόιδιοι στα χαρακτηριστικά τους. Στο αρχικο thread λέει και ποια παράμετρο να αλλάξεις στο toolbox με έναν hex editor ώστε να δουλεύει και αυτό.

Link to comment
Share on other sites

  • 10 months later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.