Jump to content



help psp downgrade


Ghost O/C

Recommended Posts

Γεια σας παιδια

Θελω να κανω downgrade στο psp και απο την εκδοση 3.50 να το παω στην 1.50

εχω τον downgrader ομως δεν καταλαβαινω ορισμενες οδηγιες και χρειαζομαι την βοηθεια σας

τα σημεια που δεν καταλαβαινω τα εχω αριθμισει

οδηγιες

Requirements

In order to downgrade a 3.50 PSP you will need the following:

1- Original LUMINES UMD (UK, US, JAP, (Korean unknown), Platinum will work too and Best.

- If you have a 3.10,3.11,3.30 or 3.40 firmware psp update to 3.50 and then use this downgrader.

updates can be found at www.pspcalo.co.nr in the "upgrade" section.

******************************************************************

* WARNING, ANY DOWNGRADER HAS A CHANCE OF BRICKING A PSP. WHEN A *

* PSP IS BRICKED YOU WILL NOT BE ABLE TO USE IT ANYMORE. Noobz *

* HAVE DONE A LOT TO TRY AND MINIMISE THE RISK, BUT THERE IS *

* ALWAYS SOME LEVEL OF RISK WHICH YOU MUST ACCEPT IF YOU WANT TO *

* DOWNGRADE. WITH THIS INSTALLER CHANCHES ARE EXTREMLY LOW OF A *

* BRICK *

******************************************************************

Must:

-----

Plug Ac Adaptor plugged in.

Have battery more than 75% full.

Backup MemoryStick and then format it.

Instructions

------------

Here are the steps to downgrade any 3.50 PSP to 1.50:

- Double click 3.50_downgrader.exe and extract the contents to memorystick, overwrite if asked.

2 - Load up Lumines

3 - It should get to loading savegame, then the screen will clear to black

and fill with a light blue colour, then the PSP will reset itself (if

this does not happen see section below)

- Check that HEN is running by going to system settings, then to

"System Information" and it should show up as system version

3.50 HEN

- If it is showing up as HEN then go to the GAME menu then Memory Stick and

run the PSPtm Update x.yz update

4 - If you have an unpatched TA-082 or higher motherboard, you will be

prompted to allow the downgrader to patch your motherboard so it

can be safely downgraded. The downgrader will not let you proceed

without patching, if your motherboard requires it.

- Before the downgrader does anything to your PSP it will ask

for you to agree to what it is doing, if you no longer want to

continue press the Right Shoulder Button (R-TRIGGER).

- Once you have agreed to start the downgrade do not unplug the

PSP, or try and restart it

- Once finished the PSP will ask you to press X, and reset itself

- If it comes up saying that the settings are corrupt, press x or o

to continue.

- All done now :-) Hopefully you now have a 1.50 PSP. Enjoy it responsibly.

Hint: If you psp has a blank screen after it resets, press the screen brightness

button a few times and it should sort it out.

After downgrading you can format MemoryStick again.

----------------------

Warning

-------

Do not upgrade back to 3.30+ on a ta-082 or ta-086 motherboard or you will brick your

psp, but you CAN upgrade to any version of oe. fanjita the creator said he'd make an

application to fix this problem soon.

:)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.