Μπλε Οθόνη

[madnes]

Καλημέρα παιδιά, έχω to laptop της Acer to 9513wsmi του ειχα αλάξει σκληρό δίσκο βάζοντας εναν 250GB από το e-bay. Κάθε φορά που το άνοιγα μου έκανε chek disk, τώρα κάνει chek disk αλλά μόλις πάει να ανόιξει μου πετάει μπλε οθόνη με μήνυμα PAGE_FAULT_IN_NONPAGE_AREA_ .Μπορείτε να μου πείτε τι είναι?

Ευχαριστώ!!!!!

[makio]

''This Stop message usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, either main memory, L2 RAM cache, or video RAM). If hardware has been added to the system recently, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. Run hardware diagnostics supplied by the system manufacturer. For details on these procedures, see the owners manual for your computer. Another cause of this Stop message is the installation of a buggy system service. Disable the service and determine if this resolves the error. If so, contact the manufacturer of the system service about a possible update. If the error occurs during system startup, restart your computer, and press F8 at the character-mode menu that displays the operating system choices. At the resulting Windows 2000 Advanced Options menu, choose the Last Known Good Configuration option. This option is most effective when only one driver or service is added at a time. Antivirus software can also trigger this Stop message. Disable the program and determine if this resolves the error. If it does, contact the manufacturer of the program about a possible update. A corrupted NTFS volume can also generate this Stop message. Run Chkdsk /f /r to detect and repair disk errors. Restart the system before the disk scan begins on a system partition. If the hard disk is SCSI, check for problems between the SCSI controller and the disk. Finally, check the System Log in Event Viewer for additional error messages that might help pinpoint the device or driver causing the error. Disabling memory caching of the BIOS might also resolve it. For more troubleshooting information about this Stop message, refer to the Microsoft Knowledge Base at http://support.microsoft.com/support. ''

αυτα σαν γενικη κατευθυνση τι να ψαξεις

απο τα λιγα που γραφεις δεν βγαινει συμπερασμα - ο δισκος πχ λογικα αγοραστηκε καινουργιος (οχι refurbished)? -εκανες καθαρη εγκατασταση ή επαναφορα απο recovery ? - περασες νεους drivers?

[jimsid]

Αν μπορεις βγαλε τον δισκο και με καποιον ανταπτορα συνδεσε τον σε αλλο μηχανημα και κανε scandisk με το λειτουργικο του αλλου μηχανηματος με διορθωση ολων των λαθων που θα βρει στον δισκο.