Jump to content
Sign in to follow this  
TASOS

BSOD σχετικά με Overclocking

Recommended Posts

Common BSOD Error Codes for Overclocking

0x101 = increase vcore

0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is

on i7 45nm, usually means too little VVT/QPI for the speed of Uncore

on i7 32nm SB, usually means too little vCore

0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore

0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage

0x1E = increase vcore

0x3B = increase vcore

0x3D = increase vcore

0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage

0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances

0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x

0x109 = Not enough or too Much memory voltage

0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)

0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

BSOD Codes for Sandy Bridge

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)

0x101 = add more vcore

0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT

0x1E = add more vcore

0x3B = add more vcore

0xD1 = add QPI/VTT voltage

“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”

0X109 = add DDR3 voltage

0x0A = add QPI/VTT voltage

-How to-

Disable automatic restart after a BSOD. this

Πηγή

http://www.overclock.net/

Edited by TASOS
  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.