Jump to content



Ποια εκδοση linux για λαπτοπ ;Αντε να ασχοληθουμε με κατι νεο


GoMaR

Recommended Posts

δε μπορω να καταλαβω.....

γτ οποτε κανω ρεσταρτ εξαφανιζεται το location απο το network που εχω φτιαξει ;

#@$$%@#$@#$@

Γτ αν μη τι αλλο το λαπτοπ το θελω για κατεβαστηρι και τα αρχεια να κατεβαινουν με την μια στον ΝΑΣ.

στα windows ειχα κανει map network και ειχα ορισει στο utorrent το map network path..

εδω πως #@%$#$##@ το κανω ;

οπως καταλαβατε εφτιαξα και τον συνδιασμο για το πληκτρολογιο :p

edit:

κατεβασα τον VLC απο τον ενσωματωμενο manager που εχει και παω να παιξω αρχειο βιντεο απο τον ΝΑΣ και δεν....

Your input can't be opened:

VLC is unable to open the MRL 'smb://192.168.1.5/homestuff/-=%20HD%20MOVIES%20=-/Battleship.2012.720p.BluRay.DTS.x264-MOOVEE/moovee-bs-720.mkv'. Check the log for details.

edit2

καλα ειαμι φοβερος.Καταφερα και αλλαξα theme μεσω τερμιναλ :p

αυτο που δε καταλαβαινω γιατι το /usr/share/cinnamon , δε μπορω να αλλαξω τα permissions γτ δεν ειαμι ο owner.

αμα το σπασω εγω θα φταιω ;

Link to comment
Share on other sites

  • Replies 56
  • Created
  • Last Reply
Παρολο που εχω χαμηλα ποσοστα ραμ δε νιωθω οτι παει αερα το λειτουργικο.

Δεν εχει αυτη την ομαλη αισθηση ρε παιδι μου και για φρεσκια εγκατασταση.Ειναι σα ταλαιπωρημενο χρονων λειτουργικο.

Να μπαινω στους φακελους και να περιμενω 1 δευτερολεπτο.

Στο ιντερνετ ειδικα φεισμπουκ (ακομα δεν εχω βρει τα αγγλικα :Ρ) και κανα γιουτιουμπ παει "σπαστα"

σα να μη νεχω φορτωσει οδηγους.Απο οτι ειδα ομως ειναι φορτωμενοι.

μηπως το σινναμοντ ειναι αρκετα βαρυ ; η ειναι κατι αλλο που πρεπει να ψαξω ;

Δεν εχω την αμεση αποκριση στα πραγματα.

ερωτησεις

Για να μπω στον ΝΑΣ απο φιλε μαναγερ φτιαχνω νεο κοννεξιον ; για να γινει μαουντ;

Γτ μεσα απο το νετγουορκ δεν με αφηνει να μπω.

Επισης πως αλλαζω το γορκγρουπ που θελω ;

Ντιφραγκ στον δισκο παιζει τετοιο πραγμα στο λινουξ ;

Κατεβασα ενα θημ για το σινναμοντ.Αλλα που διαολο βαζω τον φακελο ;

εντιτ : μηπως να κατεβαζα την MATE ;

edit2

καλα ειαμι φοβερος.Καταφερα και αλλαξα theme μεσω τερμιναλ :p

αυτο που δε καταλαβαινω γιατι το /usr/share/cinnamon , δε μπορω να αλλαξω τα permissions γτ δεν ειαμι ο owner.

αμα το σπασω εγω θα φταιω ;

εγώ χτες τα έκανα δοκιμή σε vm και μάλιστα απομακρυσμένα και παγαίνανε σφαίρα

έβαλα και cinammon και matte

η αλήθεια είναι ότι τα matte είναι ένα click πιο ελαφριά

Στα ubuntu πήγενα connect to server και μετά σου έχει επιλογές

το samba δες να έχεις εγκαταστήσει

sudo στην εντολή και θα γίνεις root :p

αλλιώς sudo -i και στο terminal είσαι root μετά

Link to comment
Share on other sites

δε μπορω να καταλαβω.....

γτ οποτε κανω ρεσταρτ εξαφανιζεται το location απο το network που εχω φτιαξει ;

#@$$%@#$@#$@

Γτ αν μη τι αλλο το λαπτοπ το θελω για κατεβαστηρι και τα αρχεια να κατεβαινουν με την μια στον ΝΑΣ.

στα windows ειχα κανει map network και ειχα ορισει στο utorrent το map network path..

εδω πως #@%$#$##@ το κανω ;

οπως καταλαβατε εφτιαξα και τον συνδιασμο για το πληκτρολογιο :p

edit:

κατεβασα τον VLC απο τον ενσωματωμενο manager που εχει και παω να παιξω αρχειο βιντεο απο τον ΝΑΣ και δεν....

Your input can't be opened:

VLC is unable to open the MRL 'smb://192.168.1.5/homestuff/-=%20HD%20MOVIES%20=-/Battleship.2012.720p.BluRay.DTS.x264-MOOVEE/moovee-bs-720.mkv'. Check the log for details.

edit2

καλα ειαμι φοβερος.Καταφερα και αλλαξα theme μεσω τερμιναλ :p

αυτο που δε καταλαβαινω γιατι το /usr/share/cinnamon , δε μπορω να αλλαξω τα permissions γτ δεν ειαμι ο owner.

αμα το σπασω εγω θα φταιω ;

εννοείς όταν ανοίγει να κάνει mount ένα location?

αυτό το γράφεις στο αρχείο /etc/fstab το οποίο είναι υπεύθυνο για όλα τα mount

Link to comment
Share on other sites

Παρολο που εχω χαμηλα ποσοστα ραμ δε νιωθω οτι παει αερα το λειτουργικο.

Δεν εχει αυτη την ομαλη αισθηση ρε παιδι μου και για φρεσκια εγκατασταση.Ειναι σα ταλαιπωρημενο χρονων λειτουργικο.

Να μπαινω στους φακελους και να περιμενω 1 δευτερολεπτο.

Με φρέσκα win7 το θυμάσαι να πηγαίνει "αέρα"; Μην ξεχνάς ότι έβαλες OS του 2013 με όλα τα καλούδια, σε laptop 5ετίας (υποθέτω). Το cinnamon είναι το πιο βαρύ DE από τις default επιλογές που έχεις στο MINT. Το mate είναι ένα κλικ πιο ελαφρύ και το πιο ελαφρύ είναι το lxde (το οποίο και σου προτείνω).

Στο ιντερνετ ειδικα φεισμπουκ (ακομα δεν εχω βρει τα αγγλικα :Ρ) και κανα γιουτιουμπ παει "σπαστα"

Στα win7 σου έτρεχαν τα βιντεάκια ok, να υποθέσω; Την ώρα που παίζει ένα βιντεάκι, τρέξε ένα system monitor σε παρακαλώ και πες μου τι cpu usage έχεις. Μπορείς να μου πεις και ποια κάρτα γραφικών έχεις και ποιους drivers χρησιμοποιείς (open source ή proprietary); Επειδή δεν ξέρω το mint για να σου πω πώς να το δεις από gui, δώσε στο terminal:

Για να δεις την κάρτα γραφικών

lspci | grep VGA

Αν έχεις nvidia πες αν σου επιστρέφει κάτι η εντολή

lsmod | grep nv

Αν έχεις ATI πες μου αν σου επιστρέφει κάτι η εντολή

lsmod | grep radeon

Στα ερωτήματά σου δεν ξέρω να σου πω για τα δίκτυα που ρωτάς, μιας και δεν έχω ασχοληθεί καθόλου με το θέμα.

Ντιφραγκ στον δισκο παιζει τετοιο πραγμα στο λινουξ ;

Λογικά είσαι με Ext4(ή 3) FS, οπότε δε χρειάζεσαι defrag... ever...:happy2:

Link to comment
Share on other sites

Για να δούμε τι hardware έχεις και τι modules έχει το καθενα:

Δώσε μας το αποτέλεσμα του παρακάτω:

$lspci -k

Επίσης ρίξε και το output του

$dmesg

Επειδή το output του 2ου είναι αρκετά μεγάλο,κάνε το εξής:

$dmesg > dmesg.txt

Αυτό θα δημιουργήσει ένα αρχείο dmesg.txt στο /home/"your username"

Οπότε μπορείς να το ανεβάσεις εδώ να το δούμε.

Σημειωση: Το $ μπροστά απο τις εντολές δεν χρειάζεται, το βάζω για να δηλωσω ότι το τρέχεις ως απλός χρήστης.

Link to comment
Share on other sites

ρε σεις τωρα τα ειδα..Τα διαβαζω και απανταω :p

εδιτ:

ναι αερα πανε τα win7.και μετα απο 3 βδομαδες χωρις restart

λοιπον [MENTION=1066]gdp77[/MENTION] νομιζα οτι ειχα τη LXDE γτ αυτην πηγα να κατεβασω και κατεληξα στην cinnamon.lol

οποτε μιας και βλεπω οτι το μηχανημα ζοριζεται , θα θελα να μου δωσεις λινκ απο την LXDE 64bit να δοκιμασω και μετα θα σας σπαμμαρω:D

μη χανω τον χρονο μου αδικα με ενα λειτουργικο που θελει 100οκτανια για να δουλεψει.

το λαπτοπ αποτελειται απο εναν dual core με P965 chipset νομιζω

και καρτα γραφικων χ3100? της ιντελ ; το λεω σωστα ;

με τον chromiun μου βγαλε τη πιστη.Το κατεβασα απο το system manager (μια εφαμοργη που ψαχνεις ολα προγραμματα στο λινουξ) και μου λεγε συνεχεια για update to φλας..Προσπαθουσα να το κανω αλλα δε καταλαβαινα τπτ απο τα αρχεια που πρεπει να κατεβασω τα οποια δεν ηξερα που να τα κανω εξτρακτ (ασχετα που μου λεγε οτι ειναι για firefox :p)

παντως πηγαινε καλυτερα.Δε με καλυπτει και θα δοκιμασω την LXDE [MENTION=1066]gdp77[/MENTION] link γτ αν το κανω παλι μονος θα καταληξω σε ubuntu 7

Στα ερωτήματά σου δεν ξέρω να σου πω για τα δίκτυα που ρωτάς, μιας και δεν έχω ασχοληθεί καθόλου με το θέμα.

οτι θες μου λες μιας και βρηκα λυση.xaxa

Link to comment
Share on other sites

Linux Mint 13 "Maya" - Xfce (64-bit) - Linux Mint

Αν και στο acer aspire one που έχω με 1,5GB μνήμη έχω βάλει το ΜΑΤΕ και πάει περίφημα.

Καλύτερα να βάλει Linux Mint 14 "Nadia" Xfce (64 bit)

Πάντως θα ήταν καλύτερα να δούμε το hardware σου (με τα output όσων σου ζητάμε παραπάνω), γιατί τα 2 fps στο youtube που αναφέρεις σε άλλο forum, δε νομίζω να είναι εξαιτίας του cinnamon

Υ.Γ. Τώρα είδα ότι το mint δεν έχει στο official site έτοιμη έκδοση με lxde, αλλά xfce.

Link to comment
Share on other sites

Καλύτερα να βάλει Linux Mint 14 "Nadia" Xfce (64 bit)

Πάντως θα ήταν καλύτερα να δούμε το hardware σου (με τα output όσων σου ζητάμε παραπάνω), γιατί τα 2 fps στο youtube που αναφέρεις σε άλλο forum, δε νομίζω να είναι εξαιτίας του cinnamon

Υ.Γ. Τώρα είδα ότι το mint δεν έχει στο official site έτοιμη έκδοση με lxde, αλλά xfce.

Γιατί να μη βάλει το Maya που είναι lts; Αφού το μηχανάκι είναι κομματάκι παλιό απ' ότι έχω καταλάβει και θέλει κάτι σταθερό και γρήγορο δεν υπάρχει λόγος να πάει στο Nadia και σε ένα χρόνο να πρέπει να το αλλάξει.

Link to comment
Share on other sites

lspci|grep VGA

gomar@htpc ~ $ lspci|grep VGA

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)

lspci -k

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: i915

00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

Subsystem: Hewlett-Packard Company Device 30d9

Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)

Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)

00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: ata_piix

00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: i801_smbus

01:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)

Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller

Kernel driver in use: b43-pci-bridge

02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

Subsystem: Hewlett-Packard Company Presario C700

Kernel driver in use: 8139too

output:

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1

[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=88c7cb29-ff7c-45b6-8b20-5b5272bfa1da ro quiet splash

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f4d2000 (usable)

[ 0.000000] BIOS-e820: 000000007f4d2000 - 000000007f4dd000 (reserved)

[ 0.000000] BIOS-e820: 000000007f4dd000 - 000000007f534000 (usable)

[ 0.000000] BIOS-e820: 000000007f534000 - 000000007f537000 (reserved)

[ 0.000000] BIOS-e820: 000000007f537000 - 000000007f5bb000 (usable)

[ 0.000000] BIOS-e820: 000000007f5bb000 - 000000007f5bf000 (reserved)

[ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f678000 (usable)

[ 0.000000] BIOS-e820: 000000007f678000 - 000000007f6bf000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000007f6bf000 - 000000007f700000 (ACPI data)

[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)

[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI 2.4 present.

[ 0.000000] DMI: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.34 09/25/2008

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[ 0.000000] No AGP bridge found

[ 0.000000] last_pfn = 0x7f678 max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect

[ 0.000000] 1 base 000000000 mask FC0000000 write-back

[ 0.000000] 2 base 040000000 mask FC0000000 write-back

[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable

[ 0.000000] 4 base 07F700000 mask FFFF00000 uncachable

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] found SMP MP-table at [ffff8800000fe270] fe270

[ 0.000000] initial memory mapped : 0 - 20000000

[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480

[ 0.000000] init_memory_mapping: 0000000000000000-000000007f678000

[ 0.000000] 0000000000 - 007f600000 page 2M

[ 0.000000] 007f600000 - 007f678000 page 4k

[ 0.000000] kernel direct mapping tables up to 7f678000 @ 1fffc000-20000000

[ 0.000000] RAMDISK: 364be000 - 37257000

[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )

[ 0.000000] ACPI: XSDT 000000007f6fe120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013)

[ 0.000000] ACPI: FACP 000000007f6fd000 000F4 (v04 HP SPARTAN 00000001 LOHR 00000000)

[ 0.000000] ACPI: DSDT 000000007f6f4000 0802F (v01 HP SPARTAN 00000001 LOHR 00000000)

[ 0.000000] ACPI: FACS 000000007f67d000 00040

[ 0.000000] ACPI: APIC 000000007f6f3000 00068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)

[ 0.000000] ACPI: HPET 000000007f6f2000 00038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)

[ 0.000000] ACPI: MCFG 000000007f6f1000 0003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)

[ 0.000000] ACPI: ASF! 000000007f6f0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)

[ 0.000000] ACPI: SLIC 000000007f6ef000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)

[ 0.000000] ACPI: BOOT 000000007f6ee000 00028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)

[ 0.000000] ACPI: SSDT 000000007f6ed000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-000000007f678000

[ 0.000000] Initmem setup node 0 0000000000000000-000000007f678000

[ 0.000000] NODE_DATA [000000007f673000 - 000000007f677fff]

[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] DMA32 0x00001000 -> 0x00100000

[ 0.000000] Normal empty

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[5] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009f

[ 0.000000] 0: 0x00000100 -> 0x0007f4d2

[ 0.000000] 0: 0x0007f4dd -> 0x0007f534

[ 0.000000] 0: 0x0007f537 -> 0x0007f5bb

[ 0.000000] 0: 0x0007f5bf -> 0x0007f678

[ 0.000000] On node 0 totalpages: 521717

[ 0.000000] DMA zone: 56 pages used for memmap

[ 0.000000] DMA zone: 5 pages reserved

[ 0.000000] DMA zone: 3922 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 7079 pages used for memmap

[ 0.000000] DMA32 zone: 510655 pages, LIFO batch:31

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 000000007f4d2000 - 000000007f4dd000

[ 0.000000] PM: Registered nosave memory: 000000007f534000 - 000000007f537000

[ 0.000000] PM: Registered nosave memory: 000000007f5bb000 - 000000007f5bf000

[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007f200000 s82880 r8192 d23616 u1048576

[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514577

[ 0.000000] Policy zone: DMA32

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=88c7cb29-ff7c-45b6-8b20-5b5272bfa1da ro quiet splash

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] Checking aperture...

[ 0.000000] No AGP bridge found

[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area

[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[ 0.000000] Memory: 2035524k/2087392k available (3416k kernel code, 524k absent, 51344k reserved, 3319k data, 576k init)

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.

[ 0.000000] NR_IRQS:33024 nr_irqs:512 16

[ 0.000000] Console: colour VGA+ 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] hpet clockevent registered

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 1462.980 MHz processor.

[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2925.96 BogoMIPS (lpj=5851920)

[ 0.004012] pid_max: default: 32768 minimum: 301

[ 0.004082] Security Framework initialized

[ 0.004092] AppArmor: AppArmor disabled by boot time parameter

[ 0.004383] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.006001] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.006815] Mount-cache hash table entries: 256

[ 0.007049] Initializing cgroup subsys cpuacct

[ 0.007058] Initializing cgroup subsys memory

[ 0.007078] Initializing cgroup subsys devices

[ 0.007081] Initializing cgroup subsys freezer

[ 0.007087] Initializing cgroup subsys net_cls

[ 0.007090] Initializing cgroup subsys blkio

[ 0.007103] Initializing cgroup subsys perf_event

[ 0.007155] CPU: Physical Processor ID: 0

[ 0.007158] CPU: Processor Core ID: 0

[ 0.007162] mce: CPU supports 6 MCE banks

[ 0.007175] CPU0: Thermal monitoring enabled (TM1)

[ 0.007182] using mwait in idle threads.

[ 0.008243] ACPI: Core revision 20110623

[ 0.016570] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.056358] CPU0: Intel® Pentium® Dual CPU T2310 @ 1.46GHz stepping 0d

[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.

[ 0.060003] PEBS disabled due to CPU errata.

[ 0.060003] ... version: 2

[ 0.060003] ... bit width: 40

[ 0.060003] ... generic registers: 2

[ 0.060003] ... value mask: 000000ffffffffff

[ 0.060003] ... max period: 000000007fffffff

[ 0.060003] ... fixed-purpose events: 3

[ 0.060003] ... event mask: 0000000700000003

[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.060003] Booting Node 0, Processors #1 Ok.

[ 0.060003] smpboot cpu 1: start_ip = 9a000

[ 0.148057] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.148116] Brought up 2 CPUs

[ 0.148120] Total of 2 processors activated (5851.93 BogoMIPS).

[ 0.149311] devtmpfs: initialized

[ 0.153866] PM: Registering ACPI NVS region at 7f678000 (290816 bytes)

[ 0.153866] print_constraints: dummy:

[ 0.153866] NET: Registered protocol family 16

[ 0.153866] ACPI: bus type pci registered

[ 0.153866] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.153866] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[ 0.201576] PCI: Using configuration type 1 for base access

[ 0.202579] bio: create slab <bio-0> at 0

[ 0.202579] ACPI: Added _OSI(Module Device)

[ 0.202579] ACPI: Added _OSI(Processor Device)

[ 0.202579] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.202579] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.204783] ACPI: EC: Look up EC in DSDT

[ 0.206633] ACPI: Executed 1 blocks of module-level executable AML code

[ 0.216614] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored

[ 0.219362] ACPI: SSDT 000000007f67cc90 001EA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)

[ 0.219802] ACPI: Dynamic OEM Table Load:

[ 0.219807] ACPI: SSDT (null) 001EA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)

[ 0.220053] ACPI: SSDT 000000007f67b610 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)

[ 0.220463] ACPI: Dynamic OEM Table Load:

[ 0.220467] ACPI: SSDT (null) 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)

[ 0.244412] ACPI: SSDT 000000007f67cf10 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)

[ 0.244837] ACPI: Dynamic OEM Table Load:

[ 0.244842] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)

[ 0.245014] ACPI: SSDT 000000007f67ed10 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)

[ 0.245423] ACPI: Dynamic OEM Table Load:

[ 0.245428] ACPI: SSDT (null) 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)

[ 0.276045] ACPI: EC: GPE storm detected, transactions will use polling mode

[ 0.376061] ACPI: Interpreter enabled

[ 0.376069] ACPI: (supports S0 S3 S4 S5)

[ 0.376105] ACPI: Using IOAPIC for interrupt routing

[ 0.524311] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness

[ 0.526048] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62

[ 0.526048] ACPI: No dock devices found.

[ 0.526048] HEST: Table not found.

[ 0.526048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.526048] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)

[ 0.526048] \_SB_.PCI0:_OSC evaluation returned wrong type

[ 0.526048] _OSC request data:1 8 1f

[ 0.526048] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.526048] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]

[ 0.526048] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]

[ 0.526048] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]

[ 0.526048] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]

[ 0.528055] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600

[ 0.528129] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300

[ 0.528149] pci 0000:00:02.0: reg 10: [mem 0x91000000-0x910fffff 64bit]

[ 0.528163] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]

[ 0.528173] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]

[ 0.528232] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380

[ 0.528249] pci 0000:00:02.1: reg 10: [mem 0x91100000-0x911fffff 64bit]

[ 0.528384] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403

[ 0.528412] pci 0000:00:1b.0: reg 10: [mem 0x92400000-0x92403fff 64bit]

[ 0.528538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.528582] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604

[ 0.528715] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.528767] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03

[ 0.528835] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]

[ 0.528889] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03

[ 0.528957] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]

[ 0.529012] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03

[ 0.529079] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]

[ 0.529150] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03

[ 0.529180] pci 0000:00:1d.7: reg 10: [mem 0x92404800-0x92404bff]

[ 0.529308] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 0.529343] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604

[ 0.529463] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601

[ 0.529601] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)

[ 0.529674] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101

[ 0.529695] pci 0000:00:1f.1: reg 10: [io 0x30c8-0x30cf]

[ 0.529710] pci 0000:00:1f.1: reg 14: [io 0x30e4-0x30e7]

[ 0.529726] pci 0000:00:1f.1: reg 18: [io 0x30c0-0x30c7]

[ 0.529741] pci 0000:00:1f.1: reg 1c: [io 0x30e0-0x30e3]

[ 0.529756] pci 0000:00:1f.1: reg 20: [io 0x30a0-0x30af]

[ 0.529824] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106

[ 0.529857] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf]

[ 0.529872] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]

[ 0.529888] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7]

[ 0.529903] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]

[ 0.529918] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]

[ 0.529933] pci 0000:00:1f.2: reg 24: [mem 0x92404000-0x924047ff]

[ 0.530014] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.530047] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05

[ 0.530068] pci 0000:00:1f.3: reg 10: [mem 0x92404c00-0x92404cff]

[ 0.530119] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]

[ 0.530312] pci 0000:01:00.0: [14e4:4311] type 0 class 0x000280

[ 0.530349] pci 0000:01:00.0: reg 10: [mem 0x91300000-0x91303fff 64bit]

[ 0.530540] pci 0000:01:00.0: supports D1 D2

[ 0.536099] pci 0000:00:1c.0: PCI bridge to [bus 01-01]

[ 0.536107] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]

[ 0.536114] pci 0000:00:1c.0: bridge window [mem 0x91300000-0x923fffff]

[ 0.536125] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]

[ 0.536189] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200

[ 0.536218] pci 0000:02:01.0: reg 10: [io 0x1000-0x10ff]

[ 0.536235] pci 0000:02:01.0: reg 14: [mem 0x91200000-0x912000ff]

[ 0.536353] pci 0000:02:01.0: supports D1 D2

[ 0.536356] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold

[ 0.536436] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)

[ 0.536443] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]

[ 0.536451] pci 0000:00:1e.0: bridge window [mem 0x91200000-0x912fffff]

[ 0.536462] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)

[ 0.536466] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)

[ 0.536471] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[ 0.536476] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)

[ 0.536498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.536837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]

[ 0.536921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]

[ 0.537155] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)

[ 0.537167] \_SB_.PCI0:_OSC evaluation returned wrong type

[ 0.537170] _OSC request data:1 1f 1f

[ 0.537177] pci0000:00: Requesting ACPI _OSC control (0x1d)

[ 0.537270] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)

[ 0.537281] \_SB_.PCI0:_OSC evaluation returned wrong type

[ 0.537284] _OSC request data:1 0 1d

[ 0.537290] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d

[ 0.537294] ACPI _OSC control for PCIe not granted, disabling ASPM

[ 0.543081] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.543182] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)

[ 0.543284] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.543382] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.543478] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.543574] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.543670] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.543768] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.544065] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.544081] vgaarb: loaded

[ 0.544084] vgaarb: bridge control possible 0000:00:02.0

[ 0.544086] PCI: Using ACPI for IRQ routing

[ 0.556993] PCI: pci_cache_line_size set to 64 bytes

[ 0.557099] reserve RAM buffer: 000000000009fc00 - 000000000009ffff

[ 0.557104] reserve RAM buffer: 000000007f4d2000 - 000000007fffffff

[ 0.557110] reserve RAM buffer: 000000007f534000 - 000000007fffffff

[ 0.557116] reserve RAM buffer: 000000007f5bb000 - 000000007fffffff

[ 0.557121] reserve RAM buffer: 000000007f678000 - 000000007fffffff

[ 0.557311] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[ 0.557319] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.557326] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

[ 0.560173] Switching to clocksource hpet

[ 0.563197] pnp: PnP ACPI init

[ 0.563230] ACPI: bus type pnp registered

[ 0.632578] pnp 00:00: [bus 00-ff]

[ 0.632583] pnp 00:00: [io 0x0000-0x0cf7 window]

[ 0.632587] pnp 00:00: [io 0x0cf8-0x0cff]

[ 0.632590] pnp 00:00: [io 0x0d00-0xffff window]

[ 0.632594] pnp 00:00: [mem 0x000a0000-0x000bffff window]

[ 0.632598] pnp 00:00: [mem 0x000c0000-0x000c3fff window]

[ 0.632602] pnp 00:00: [mem 0x000c4000-0x000c7fff window]

[ 0.632605] pnp 00:00: [mem 0x000c8000-0x000cbfff window]

[ 0.632609] pnp 00:00: [mem 0x000cc000-0x000cffff window]

[ 0.632613] pnp 00:00: [mem 0x000d0000-0x000d3fff window]

[ 0.632617] pnp 00:00: [mem 0x000d4000-0x000d7fff window]

[ 0.632620] pnp 00:00: [mem 0x000d8000-0x000dbfff window]

[ 0.632624] pnp 00:00: [mem 0x000dc000-0x000dffff window]

[ 0.632628] pnp 00:00: [mem 0x000e0000-0x000e3fff window]

[ 0.632631] pnp 00:00: [mem 0x000e4000-0x000e7fff window]

[ 0.632635] pnp 00:00: [mem 0x000e8000-0x000ebfff window]

[ 0.632639] pnp 00:00: [mem 0x000ec000-0x000effff window]

[ 0.632642] pnp 00:00: [mem 0x000f0000-0x000fffff window]

[ 0.632646] pnp 00:00: [mem 0x80000000-0xfebfffff window]

[ 0.632752] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)

[ 0.632958] pnp 00:01: [io 0x002e-0x002f]

[ 0.632964] pnp 00:01: [io 0x004e-0x004f]

[ 0.632968] pnp 00:01: [io 0x164e-0x164f]

[ 0.632971] pnp 00:01: [io 0x0061]

[ 0.632974] pnp 00:01: [io 0x0070]

[ 0.632977] pnp 00:01: [io 0x0080]

[ 0.632980] pnp 00:01: [io 0x0092]

[ 0.632983] pnp 00:01: [io 0x00b2-0x00b3]

[ 0.632986] pnp 00:01: [io 0x0063]

[ 0.632989] pnp 00:01: [io 0x0065]

[ 0.632991] pnp 00:01: [io 0x0067]

[ 0.632995] pnp 00:01: [io 0x0600-0x060f]

[ 0.632998] pnp 00:01: [io 0x0610]

[ 0.633001] pnp 00:01: [io 0x0800-0x080f]

[ 0.633004] pnp 00:01: [io 0x0810-0x0817]

[ 0.633007] pnp 00:01: [io 0x0400-0x047f]

[ 0.633010] pnp 00:01: [io 0x0500-0x053f]

[ 0.633013] pnp 00:01: [io 0xff2c-0xff2f]

[ 0.633017] pnp 00:01: [mem 0xe0000000-0xefffffff]

[ 0.633020] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]

[ 0.633024] pnp 00:01: [mem 0xfed14000-0xfed17fff]

[ 0.633027] pnp 00:01: [mem 0xfed18000-0xfed18fff]

[ 0.633030] pnp 00:01: [mem 0xfed19000-0xfed19fff]

[ 0.633034] pnp 00:01: [mem 0xfec00000-0xfec00fff]

[ 0.633037] pnp 00:01: [mem 0xfee00000-0xfee00fff]

[ 0.633077] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io 0x1000-0x1fff]

[ 0.633165] system 00:01: [io 0x0600-0x060f] has been reserved

[ 0.633170] system 00:01: [io 0x0610] has been reserved

[ 0.633174] system 00:01: [io 0x0800-0x080f] has been reserved

[ 0.633179] system 00:01: [io 0x0810-0x0817] has been reserved

[ 0.633184] system 00:01: [io 0x0400-0x047f] has been reserved

[ 0.633188] system 00:01: [io 0x0500-0x053f] has been reserved

[ 0.633193] system 00:01: [io 0xff2c-0xff2f] has been reserved

[ 0.633200] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved

[ 0.633207] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 0.633212] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved

[ 0.633217] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved

[ 0.633222] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved

[ 0.633227] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.633232] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved

[ 0.633237] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.633256] pnp 00:02: [io 0x0000-0x001f]

[ 0.633259] pnp 00:02: [io 0x0081-0x0091]

[ 0.633263] pnp 00:02: [io 0x0093-0x009f]

[ 0.633266] pnp 00:02: [io 0x00c0-0x00df]

[ 0.633269] pnp 00:02: [dma 4]

[ 0.633317] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.633358] pnp 00:03: [io 0x0070-0x0077]

[ 0.633407] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.633516] pnp 00:04: [irq 0 disabled]

[ 0.633533] pnp 00:04: [irq 8]

[ 0.633536] pnp 00:04: [mem 0xfed00000-0xfed003ff]

[ 0.633588] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)

[ 0.633607] pnp 00:05: [io 0x00f0]

[ 0.633615] pnp 00:05: [irq 13]

[ 0.633666] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.633686] pnp 00:06: [mem 0xff800000-0xffffffff]

[ 0.633735] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)

[ 0.633762] pnp 00:07: [io 0x0060]

[ 0.633765] pnp 00:07: [io 0x0064]

[ 0.633773] pnp 00:07: [irq 1]

[ 0.633826] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)

[ 0.633857] pnp 00:08: [irq 12]

[ 0.633911] pnp 00:08: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)

[ 0.634054] pnp: PnP ACPI: found 9 devices

[ 0.634056] ACPI: ACPI bus type pnp unregistered

[ 0.642747] PCI: max bus depth: 1 pci_try_num: 2

[ 0.642788] pci 0000:00:1c.0: PCI bridge to [bus 01-01]

[ 0.642795] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]

[ 0.642804] pci 0000:00:1c.0: bridge window [mem 0x91300000-0x923fffff]

[ 0.642812] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]

[ 0.642823] pci 0000:00:1e.0: PCI bridge to [bus 02-02]

[ 0.642828] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]

[ 0.642837] pci 0000:00:1e.0: bridge window [mem 0x91200000-0x912fffff]

[ 0.642879] pci 0000:00:1c.0: setting latency timer to 64

[ 0.642891] pci 0000:00:1e.0: setting latency timer to 64

[ 0.642898] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]

[ 0.642901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]

[ 0.642905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.642909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]

[ 0.642913] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]

[ 0.642917] pci_bus 0000:01: resource 1 [mem 0x91300000-0x923fffff]

[ 0.642921] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]

[ 0.642925] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]

[ 0.642929] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]

[ 0.642933] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]

[ 0.642936] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]

[ 0.642940] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.642944] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff]

[ 0.643046] NET: Registered protocol family 2

[ 0.643231] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.644393] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

[ 0.647556] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.648383] TCP: Hash tables configured (established 262144 bind 65536)

[ 0.648390] TCP reno registered

[ 0.648425] UDP hash table entries: 1024 (order: 3, 32768 bytes)

[ 0.648460] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[ 0.648693] NET: Registered protocol family 1

[ 0.648725] pci 0000:00:02.0: Boot video device

[ 0.649043] PCI: CLS 0 bytes, default 64

[ 0.649129] Unpacking initramfs...

[ 5.628518] Freeing initrd memory: 13924k freed

[ 5.639075] Simple Boot Flag value 0x5 read from CMOS RAM was invalid

[ 5.639081] Simple Boot Flag at 0x44 set to 0x1

[ 5.639847] audit: initializing netlink socket (disabled)

[ 5.639869] type=2000 audit(1369925237.632:1): initialized

[ 5.659859] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 5.660691] VFS: Disk quotas dquot_6.5.2

[ 5.660740] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 5.660852] msgmni has been set to 4002

[ 5.661092] alg: No test for stdrng (krng)

[ 5.661142] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 5.661147] io scheduler noop registered

[ 5.661150] io scheduler deadline registered

[ 5.661174] io scheduler cfq registered (default)

[ 5.661298] pcieport 0000:00:1c.0: setting latency timer to 64

[ 5.661374] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X

[ 5.661528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 5.661569] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 5.661572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 5.662007] intel_idle: does not run on family 6 model 15

[ 5.662047] ERST: Table is not found!

[ 5.662050] GHES: HEST is not enabled!

[ 5.662157] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 5.716619] Linux agpgart interface v0.103

[ 5.716729] agpgart-intel 0000:00:00.0: Intel 965GM Chipset

[ 5.716866] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable

[ 5.717300] agpgart-intel 0000:00:00.0: detected 8192K stolen memory

[ 5.717495] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000

[ 5.717683] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12

[ 5.751155] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 5.751166] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 5.751381] mousedev: PS/2 mouse device common for all mice

[ 5.753092] rtc_cmos 00:03: RTC can wake from S4

[ 5.753280] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 5.753321] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs

[ 5.753339] cpuidle: using governor ladder

[ 5.753341] cpuidle: using governor menu

[ 5.753675] TCP cubic registered

[ 5.753746] NET: Registered protocol family 10

[ 5.754472] Mobile IPv6

[ 5.754476] NET: Registered protocol family 17

[ 5.754483] Registering the dns_resolver key type

[ 5.754710] PM: Hibernation image not present or could not be loaded.

[ 5.754727] registered taskstats version 1

[ 5.755320] rtc_cmos 00:03: setting system clock to 2013-05-30 14:47:17 UTC (1369925237)

[ 5.755417] Initializing network drop monitor service

[ 5.757443] Freeing unused kernel memory: 576k freed

[ 5.757724] Write protecting the kernel read-only data: 6144k

[ 5.761834] Freeing unused kernel memory: 664k freed

[ 5.766336] Freeing unused kernel memory: 680k freed

[ 5.778392] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 5.879012] udevd[52]: starting version 175

[ 5.922980] usbcore: registered new interface driver usbfs

[ 5.923019] usbcore: registered new interface driver hub

[ 5.941063] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1

[ 5.941074] ACPI: Power Button [PWRB]

[ 5.941178] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2

[ 5.941257] ACPI: Lid Switch [LID0]

[ 5.941348] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3

[ 5.941355] ACPI: Sleep Button [sLPB]

[ 5.941465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[ 5.941471] ACPI: Power Button [PWRF]

[ 5.952501] SCSI subsystem initialized

[ 5.955326] [drm] Initialized drm 1.1.0 20060810

[ 5.964320] usbcore: registered new device driver usb

[ 5.965144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 5.965229] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 5.965235] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 5.965278] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

[ 5.965326] ehci_hcd 0000:00:1d.7: debug port 1

[ 5.969227] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported

[ 5.978573] b43-pci-bridge 0000:01:00.0: setting latency timer to 64

[ 5.980903] wmi: Mapper loaded

[ 5.982883] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

[ 5.982920] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too

[ 5.983519] libata version 3.00 loaded.

[ 5.983581] 8139too: 8139too Fast Ethernet driver 0.9.28

[ 5.983650] 8139too 0000:02:01.0: setting latency timer to 64

[ 5.984926] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0xffffc9000032c000, 00:1b:38:8b:77:b0, IRQ 16

[ 5.988481] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x92404800

[ 5.996105] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)

[ 5.996119] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243)

[ 5.996131] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)

[ 5.996142] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243)

[ 6.004782] uhci_hcd: USB Universal Host Controller Interface driver

[ 6.028044] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[ 6.028123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 6.028128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.028132] usb usb1: Product: EHCI Host Controller

[ 6.028136] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd

[ 6.028139] usb usb1: SerialNumber: 0000:00:1d.7

[ 6.028350] hub 1-0:1.0: USB hub found

[ 6.028361] hub 1-0:1.0: 6 ports detected

[ 6.028507] ata_piix 0000:00:1f.1: version 2.13

[ 6.028594] ata_piix 0000:00:1f.1: setting latency timer to 64

[ 6.029624] scsi0 : ata_piix

[ 6.029813] scsi1 : ata_piix

[ 6.030427] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14

[ 6.030433] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15

[ 6.030549] i915 0000:00:02.0: setting latency timer to 64

[ 6.089363] thermal LNXTHERM:00: registered as thermal_zone0

[ 6.089368] ACPI: Thermal Zone [TZ01] (63 C)

[ 6.092977] i915 0000:00:02.0: irq 41 for MSI/MSI-X

[ 6.092988] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[ 6.092991] [drm] Driver supports precise vblank timestamp query.

[ 6.093053] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 6.104134] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0

[ 6.146134] fixme: max PWM is zero.

[ 6.204418] ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DH10, max MWDMA2

[ 6.220284] ata1.00: configured for MWDMA2

[ 6.221684] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DH10 PQ: 0 ANSI: 5

[ 6.340029] usb 1-2: new high-speed USB device number 2 using ehci_hcd

[ 6.422236] [drm] initialized overlay support

[ 6.472673] usb 1-2: New USB device found, idVendor=1a40, idProduct=0201

[ 6.472677] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 6.472682] usb 1-2: Product: USB 2.0 Hub [MTT]

[ 6.472988] hub 1-2:1.0: USB hub found

[ 6.473049] hub 1-2:1.0: 7 ports detected

[ 6.588886] fbcon: inteldrmfb (fb0) is primary device

[ 6.636025] Refined TSC clocksource calibration: 1462.999 MHz.

[ 6.636031] Switching to clocksource tsc

[ 6.744174] usb 1-2.6: new low-speed USB device number 3 using ehci_hcd

[ 6.840170] usb 1-2.6: New USB device found, idVendor=045e, idProduct=0737

[ 6.840175] usb 1-2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 6.840178] usb 1-2.6: Product: Compact Optical Mouse 500

[ 6.840181] usb 1-2.6: Manufacturer: Microsoft

[ 6.849159] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.6/1-2.6:1.0/input/input5

[ 6.849414] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.7-2.6/input0

[ 6.849445] Console: switching to colour frame buffer device 160x50

[ 6.849666] usbcore: registered new interface driver usbhid

[ 6.849670] usbhid: USB HID core driver

[ 6.854786] fb0: inteldrmfb frame buffer device

[ 6.854790] drm: registered panic notifier

[ 6.854819] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness

[ 6.855804] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness

[ 6.912143] acpi device:16: registered as cooling_device0

[ 6.912363] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6

[ 6.912373] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)

[ 6.912453] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

[ 6.912768] ahci 0000:00:1f.2: version 3.0

[ 6.912880] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X

[ 6.912942] ahci: SSS flag set, parallel bus scan disabled

[ 6.912979] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode

[ 6.912986] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems

[ 6.912995] ahci 0000:00:1f.2: setting latency timer to 64

[ 6.916261] scsi2 : ahci

[ 6.918342] scsi3 : ahci

[ 6.918522] scsi4 : ahci

[ 6.918822] ata3: SATA max UDMA/133 abar m2048@0x92404000 port 0x92404100 irq 42

[ 6.918827] ata4: DUMMY

[ 6.918830] ata5: DUMMY

[ 6.918932] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 6.918939] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 6.918963] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 6.919028] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080

[ 6.919097] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.919101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.919105] usb usb2: Product: UHCI Host Controller

[ 6.919109] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd

[ 6.919112] usb usb2: SerialNumber: 0000:00:1d.0

[ 6.919329] hub 2-0:1.0: USB hub found

[ 6.919338] hub 2-0:1.0: 2 ports detected

[ 6.919478] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 6.919484] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 6.919499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

[ 6.919555] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060

[ 6.919618] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.919623] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.919627] usb usb3: Product: UHCI Host Controller

[ 6.919630] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd

[ 6.919633] usb usb3: SerialNumber: 0000:00:1d.1

[ 6.919833] hub 3-0:1.0: USB hub found

[ 6.919841] hub 3-0:1.0: 2 ports detected

[ 6.919976] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 6.919982] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 6.919994] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

[ 6.920077] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040

[ 6.920134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.920139] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.920142] usb usb4: Product: UHCI Host Controller

[ 6.920146] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd

[ 6.920149] usb usb4: SerialNumber: 0000:00:1d.2

[ 6.920486] hub 4-0:1.0: USB hub found

[ 6.920496] hub 4-0:1.0: 2 ports detected

[ 7.408024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 7.409644] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[ 7.410006] ata3.00: ATA-8: ST9160310AS, SD03, max UDMA/133

[ 7.410011] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 7.411938] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[ 7.412288] ata3.00: configured for UDMA/133

[ 7.412467] scsi 2:0:0:0: Direct-Access ATA ST9160310AS SD03 PQ: 0 ANSI: 5

[ 7.425500] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 7.425507] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 7.425879] sr 0:0:0:0: Attached scsi CD-ROM sr0

[ 7.426306] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)

[ 7.426448] sd 2:0:0:0: [sda] Write Protect is off

[ 7.426453] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 7.426488] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 7.429836] sr 0:0:0:0: Attached scsi generic sg0 type 5

[ 7.429915] sd 2:0:0:0: Attached scsi generic sg1 type 0

[ 7.438288] sda: sda1

[ 7.438702] sd 2:0:0:0: [sda] Attached SCSI disk

[ 8.034310] uvesafb: Intel Corporation, Intel®GM965/PM965/GL960 Graphics Controller, Hardware Version 0.0, OEM: Intel®GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS, VBE v3.0

[ 8.069373] uvesafb: VBIOS/hardware supports DDC2 transfers

[ 8.082074] uvesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 68 MHz

[ 8.082315] uvesafb: scrolling: redraw

[ 8.083749] uvesafb: framebuffer at 0x80000000, mapped to 0xffffc90021180000, using 6144k, total 7616k

[ 8.083754] fb1: VESA VGA frame buffer device

[ 8.087353] vga16fb: initializing

[ 8.087359] vga16fb: mapped to 0xffff8800000a0000

[ 8.087461] fb2: VGA16 VGA frame buffer device

[ 8.561964] Btrfs loaded

[ 8.667136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[ 12.125604] udevd[357]: starting version 175

[ 12.916070] iTCO_vendor_support: vendor-support=0

[ 12.918763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07

[ 12.918922] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)

[ 12.919355] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 13.120669] input: PC Speaker as /devices/platform/pcspkr/input/input7

[ 13.392659] ACPI: Requesting acpi_cpufreq

[ 13.393074] Monitor-Mwait will be used to enter C-1 state

[ 13.393087] Monitor-Mwait will be used to enter C-2 state

[ 13.393096] Monitor-Mwait will be used to enter C-3 state

[ 13.393103] Marking TSC unstable due to TSC halts in idle

[ 13.393124] ACPI: acpi_idle registered with cpuidle

[ 13.394400] Switching to clocksource hpet

[ 13.494815] input: HP WMI hotkeys as /devices/virtual/input/input8

[ 13.628148] ACPI: AC Adapter [AC] (on-line)

[ 13.717090] ACPI: Battery Slot [bAT0] (battery absent)

[ 13.736655] udevd[476]: renamed network interface eth0 to eth1

[ 13.902203] cfg80211: Calling CRDA to update world regulatory domain

[ 14.213581] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9

[ 14.249357] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10

[ 14.393515] b43-phy0: Broadcom 4311 WLAN found (core revision 13)

[ 14.571972] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[ 14.572931] Registered led device: b43-phy0::tx

[ 14.572967] Registered led device: b43-phy0::rx

[ 14.573009] Registered led device: b43-phy0::radio

[ 14.573036] Broadcom 43xx driver loaded [ Features: PMNLS ]

[ 14.787992] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X

[ 14.788094] snd_hda_intel 0000:00:1b.0: setting latency timer to 64

[ 15.090780] hda_codec: CX20549 (Venice): BIOS auto-probing.

[ 15.091515] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11

[ 15.562794] cfg80211: World regulatory domain updated:

[ 15.562800] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 15.562805] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 15.562810] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 15.562815] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 15.562819] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 15.562824] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 17.347819] EXT4-fs (sda1): re-mounted. Opts: (null)

[ 17.821848] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

[ 18.384936] device-mapper: uevent: version 1.0.3

[ 18.385043] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel[MENTION=12892]red[/MENTION]hat.com

[ 18.601310] loop: module loaded

[ 21.203688] fuse init (API version 7.17)

[ 31.540792] Bluetooth: Core ver 2.16

[ 31.540834] NET: Registered protocol family 31

[ 31.540838] Bluetooth: HCI device and connection manager initialized

[ 31.540843] Bluetooth: HCI socket layer initialized

[ 31.540847] Bluetooth: L2CAP socket layer initialized

[ 31.540856] Bluetooth: SCO socket layer initialized

[ 31.652604] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 31.652609] Bluetooth: BNEP filters: protocol multicast

[ 31.711674] Bluetooth: RFCOMM TTY layer initialized

[ 31.711682] Bluetooth: RFCOMM socket layer initialized

[ 31.711685] Bluetooth: RFCOMM ver 1.11

[ 32.420951] lp: driver loaded but no devices found

[ 32.593942] ppdev: user-space parallel port driver

[ 35.491282] 8139too 0000:02:01.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

[ 46.432055] eth1: no IPv6 routers present

[15945.894232] PM: Syncing filesystems ... done.

[15945.901348] PM: Preparing system for mem sleep

[15946.016240] Freezing user space processes ... (elapsed 0.01 seconds) done.

[15946.032104] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[15946.048061] PM: Entering mem sleep

[15946.048122] Suspending console(s) (use no_console_suspend to debug)

[15946.048612] sd 2:0:0:0: [sda] Synchronizing SCSI cache

[15946.280079] sd 2:0:0:0: [sda] Stopping disk

[15946.680132] PM: suspend of devices complete after 631.676 msecs

[15946.696296] PM: late suspend of devices complete after 16.157 msecs

[15946.696460] ACPI: Preparing to enter system sleep state S3

[15946.698607] PM: Saving platform NVS memory

[15946.699305] Disabling non-boot CPUs ...

[15946.700860] CPU 1 is now offline

[15946.701643] ACPI: Low-level resume complete

[15946.701643] PM: Restoring platform NVS memory

[15946.701643] Enabling non-boot CPUs ...

[15946.701643] Booting Node 0 Processor 1 APIC 0x1

[15946.701643] smpboot cpu 1: start_ip = 9a000

[15946.700813] Calibrating delay loop (skipped) already calibrated this CPU

[15946.713490] NMI watchdog enabled, takes one hw-pmu counter.

[15946.716183] CPU1 is up

[15946.717453] ACPI: Waking up from system sleep state S3

[15946.722744] PM: early resume of devices complete after 1.020 msecs

[15946.722987] i915 0000:00:02.0: setting latency timer to 64

[15946.729909] snd_hda_intel 0000:00:1b.0: setting latency timer to 64

[15946.729969] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[15946.730003] usb usb2: root hub lost power or was reset

[15946.730027] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[15946.730057] usb usb3: root hub lost power or was reset

[15946.730078] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[15946.730108] usb usb4: root hub lost power or was reset

[15946.730131] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[15946.730168] pci 0000:00:1e.0: setting latency timer to 64

[15946.730188] ata_piix 0000:00:1f.1: setting latency timer to 64

[15946.730219] ahci 0000:00:1f.2: setting latency timer to 64

[15946.730994] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X

[15946.736434] sd 2:0:0:0: [sda] Starting disk

[15946.852608] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness

[15947.620442] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out

[15947.620448] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out

[15947.668310] ata1.00: configured for MWDMA2

[15949.068051] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[15949.630739] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[15949.632981] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[15949.633315] ata3.00: configured for UDMA/133

[15949.704349] PM: resume of devices complete after 2981.527 msecs

[15949.704614] PM: Finishing wakeup.

[15949.704617] Restarting tasks ... done.

[15949.722595] video LNXVIDEO:00: Restoring backlight state

[15950.747211] 8139too 0000:02:01.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

[15961.704068] eth1: no IPv6 routers present

να ξεκαθαρισω.μπορει τα 2 φπς ειναι υπερβολη , αλλα γενικως νιωθω οτι δεν ανταποκρινεται αμεσα.

καλυτερεψε το ολο συστημα με τον chronium οπως γραφω , αλλα γενιως δεν εχω την αισθηση της γρηγοραδας.

Θα δοκιμασω mint LXDE που λετε.

Link to comment
Share on other sites

Cinnamon με 2gb ram τζάμπα κουράζεσαι, από 4 και πάνω.

Σε παρόμοιο λαπτοπ (ειχε Vista, εβαλα 7 λόγο απαίτησης), και φυσικά θα περάσω mate που ήθελα απο την αρχή και βλέπουμε...

Link to comment
Share on other sites

Ο πυρήνας δείχνει να έχει αναγνωρίσει τα πάντα.

Τώρα για τα 2fps που λές, αν είναι σχετικά με το flash, τότε ο chromium είναι μονόδρομος. Αλλά αν είναι από το de(desktop environment-βλ.mate,cinnamon,gnome3,xfce,kde,κ.α), δεν χρησιμοποιώ κανένα απο αυτά, αλλά δύσκολο με το pc που έχεις να μην σηκώνει κανένα απο αυτά, ακόμα και το πιό βαρύ.

Link to comment
Share on other sites

Δε ξερω τι λες..εγω ξερω ομως οτι η συμπεριφορα του ειναι αδικαιολογιτη.π.χ να παταω να ανοιξει ο κρομ και να μην ανοιγει.να περιμενω μεσα στον κρομ να πατησω διορθωση σε καποιο φορουμ και να πρρεπει να το παταω 2 φορες.ειπαμε ειμαστε ασχετοι με εντολες και νοοτροπια, οχι ομως να ξερω ποτε παει καλα κατι.σα να εχω λειτουργικο και να συμπεριφερεται σα να εχει 34 ιους και 45χρονια ααφορμαριστο.

Ειχα ολη τθ καλη διαθεση να μαθω λινουξ αλλα με ξενερωσε βλεποντας αυτα.να δεχθω οτι ειναι βαρυ για το μηχανημα αλλα οχι σε σημειο να παταω ρεφρεσ στον κρομ και να εχει μονο κμεψυδρα κ να κολλαει σα να μην ανταποκρινετσι.

Link to comment
Share on other sites

Βαλε μωρε 7αρια/8αρια και σε 20' μεσα θα εχεις βαλει και drivers για ταπανταολα και θα μεταφερεις τα πικτουρς απο το καμεριδι σου στο λαπιτοπ κλπ!

Καθεσαι και ασχολεισαι με τα διαολεμενα...:p :p

(Για οσους δεν καταλαβαν ακομα και με το emoticon, αστειευομαι!)

Link to comment
Share on other sites

εναν 160αρη 5400 στροφες δε θυμαμαι εταιριας.

νομιζω seagate?

θα το κανω το βραδυ γτ τωρα ηρθα δουλεια

[MENTION=6199]SirDiman[/MENTION] : τι de μωρε ; στη μανα σου το πες ;:p εξηγα τι ειναι αυτο

[MENTION=376]YDinopoulos[/MENTION] : βαζοντας τα 7αρια δε χρειαζομαι drivers.μπαινουν ολα αυτοματα :D

απλως εισαι ασχετος και δε ξερεις πως..:p

Link to comment
Share on other sites

Δε ξερω τι λες..εγω ξερω ομως οτι η συμπεριφορα του ειναι αδικαιολογιτη.π.χ να παταω να ανοιξει ο κρομ και να μην ανοιγει.να περιμενω μεσα στον κρομ να πατησω διορθωση σε καποιο φορουμ και να πρρεπει να το παταω 2 φορες.ειπαμε ειμαστε ασχετοι με εντολες και νοοτροπια, οχι ομως να ξερω ποτε παει καλα κατι.σα να εχω λειτουργικο και να συμπεριφερεται σα να εχει 34 ιους και 45χρονια ααφορμαριστο.

Ειχα ολη τθ καλη διαθεση να μαθω λινουξ αλλα με ξενερωσε βλεποντας αυτα.να δεχθω οτι ειναι βαρυ για το μηχανημα αλλα οχι σε σημειο να παταω ρεφρεσ στον κρομ και να εχει μονο κμεψυδρα κ να κολλαει σα να μην ανταποκρινετσι.

Σε προκαλώ να έρθεις σπίτι μου να δείς με τον a6-3500 πόσο σφαίρα πάει. :p

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Δημιουργία...

Important Information

Ο ιστότοπος theLab.gr χρησιμοποιεί cookies για να διασφαλίσει την καλύτερη εμπειρία σας κατά την περιήγηση. Μπορείτε να προσαρμόσετε τις ρυθμίσεις των cookies σας , διαφορετικά θα υποθέσουμε ότι είστε εντάξει για να συνεχίσετε.